Fade/colour change whip

Le'me see... Whips, whips and - whips!
User avatar
Brandon "Sparky" Lam
Member
Posts: 1314
Joined: Thu 20. Oct 2016, 21:59
Location: Melbourne, Australia

  Fade/colour change whip

Post by Brandon "Sparky" Lam »

Hey everyone! So I had an idea a few months ago for a whip that changed colour from the handle to the fall, and today I think I've managed to do just that.

I didn't take many pictures of the process, but to digress a little, I think this is the prettiest single colour handle I've ever done so far :D
Image

The disadvantage of what I wanted to do was that I had to plait the belly and overlay at exactly the same time, so this is how it looked like most of the time -
Image

But after a while I managed to get this happening!
Image

And here are some pictures of the final product~
Image
Image

Should I pursue this to see if I can perfect this technique, or do you think it's not worth the effort? :P
I gave it a little try earlier on, and it was somewhat weird watching the loop change colour during the circus crack. I'll probably wax it in a few days, and see how it acts then~
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
User avatar
Ron May
Member
Posts: 14138
Joined: Thu 24. Sep 2015, 23:57
Location: McAllen, Texas

 

Post by Ron May »

I think that is way cool.
Yes definitely continue developing it.
I would like to know how you actually did that.
That is unless you would like to protect that method as your own. :)

I have tried it using the strand lengths to determine the color change but it only increased the accent color up to half and half at the end.

Ron
It's ok if you disagree with me.
I can't force you to be right.
User avatar
Brandon "Sparky" Lam
Member
Posts: 1314
Joined: Thu 20. Oct 2016, 21:59
Location: Melbourne, Australia

 

Post by Brandon "Sparky" Lam »

Thanks Ron!
Mmm I'm gonna see if I can try get the pattern more consistent as it transitions...but that's realllllyyy difficult.

To be honest, this method is actually inspired from an old one. I remember finding a certain thread called the "Wurth Transition", which is what inspired me to do this one. Instead of pulling all the belly strands out at the transition, I pulled them out as I plaited the thong. This was somewhat difficult because you had to line up when you dropped in and pulled out strands, so as to not ruin the pattern, as well as having to deal with the strands all over the place (thank god I have two hemostats :P )
The planning of this actually took a while, essentially I planned the strands so that some of the overlay strands were at the length of the belly strands, and some of the belly strands were at the length of the overlay strands. But I ran into the problem of strand drop locations, which kinda made it slightly more difficult as I had to pull in some strands while dropping others! Nevertheless, the trick to this is that the belly is entirely red, while the overlay is entirely black :)

Hope that helps explain it! Feel free to ask questions if that didn't make sense (which it probably didn't) haha
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
User avatar
Ron May
Member
Posts: 14138
Joined: Thu 24. Sep 2015, 23:57
Location: McAllen, Texas

 

Post by Ron May »

Thanks Brandon, that does clear it up some.
I like it.

Ron
It's ok if you disagree with me.
I can't force you to be right.
User avatar
Jesse Bessette
Member
Posts: 1596
Joined: Sun 18. Dec 2016, 14:07
Location: East Windsor, CT

 

Post by Jesse Bessette »

Brandon, that is awesome. I always wanted to do something similar to this, but my idea had been to splice in the strands on the overlay in a method similar to splicing in for the English Eye. Basically if I'm doing 6 footer, and I want the color change to begin at 3 feet, cut the black overlay strands short and drop a pair at 3 feet and splice in red at the same time.
Now and then we had a hope that if we lived and were good, God would permit us to be pirates.
-Mark Twain
User avatar
Brandon "Sparky" Lam
Member
Posts: 1314
Joined: Thu 20. Oct 2016, 21:59
Location: Melbourne, Australia

 

Post by Brandon "Sparky" Lam »

Thanks Jesse! That is also another technique, I did it in this way because I didn't want to have so many potential failure points/lumps due to the splices. This colour change starts around halfway through the whip as well, though doing it by splicing you'd have much more control over where you can splice. I just think it'd make quite a few lumps :O
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
User avatar
Rachel McCollough
Member of the Ring
Posts: 9958
Joined: Tue 21. Apr 2015, 11:37
Location: South Mississippi, USA
Contact:

 

Post by Rachel McCollough »

I really like the fade, very cool feature! Nicely done, Brandon.
Inch by inch.
User avatar
Jesse Bessette
Member
Posts: 1596
Joined: Sun 18. Dec 2016, 14:07
Location: East Windsor, CT

 

Post by Jesse Bessette »

That's what I'm wondering. How lumpy does a whip get when doing the English Eye? That's the kind of splice I'm talking about doing
Now and then we had a hope that if we lived and were good, God would permit us to be pirates.
-Mark Twain
User avatar
Brandon "Sparky" Lam
Member
Posts: 1314
Joined: Thu 20. Oct 2016, 21:59
Location: Melbourne, Australia

 

Post by Brandon "Sparky" Lam »

Thank you Rachel! :D

Ohhh I thought you meant actually splicing strands together. When doing the english eye it's really hard to find lumps if done correctly. Though you'd have to worry about dropping strands AND adding strands as well, I worry that might cause problems with the integrity of the overlay? Iunno, just thinking about that method.
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
User avatar
Ron May
Member
Posts: 14138
Joined: Thu 24. Sep 2015, 23:57
Location: McAllen, Texas

 

Post by Ron May »

Jesse, with my experience of doing just one, there is no lump when adding single strands, but with doubles there is some but a lot of those smooth out more when it's rolled. It also depends on what method of adding doubles you use.

The higher the strand count your adding to , the less noticeable the "doubled strand" lump.

Ron
It's ok if you disagree with me.
I can't force you to be right.
User avatar
Jesse Bessette
Member
Posts: 1596
Joined: Sun 18. Dec 2016, 14:07
Location: East Windsor, CT

 

Post by Jesse Bessette »

Ron, my thought is that you could just replace the strands you're dropping with the ones you are adding.
Now and then we had a hope that if we lived and were good, God would permit us to be pirates.
-Mark Twain
User avatar
Ron May
Member
Posts: 14138
Joined: Thu 24. Sep 2015, 23:57
Location: McAllen, Texas

 

Post by Ron May »

Jesse, that's kind of the way I do it.
I just figure out "adds" plaiting from the tip to the handle like I do "drops" plaiting from the handle to the tip.

Ron
It's ok if you disagree with me.
I can't force you to be right.
User avatar
Brandon "Sparky" Lam
Member
Posts: 1314
Joined: Thu 20. Oct 2016, 21:59
Location: Melbourne, Australia

 

Post by Brandon "Sparky" Lam »

I might try that method next time, would require much less planning in terms of switching from belly to overlay haha There would be a LOT of drops and adds though :O
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
Jorden Hoefling

 

Post by Jorden Hoefling »

that looks rad man, killer job
User avatar
Brandon "Sparky" Lam
Member
Posts: 1314
Joined: Thu 20. Oct 2016, 21:59
Location: Melbourne, Australia

 

Post by Brandon "Sparky" Lam »

Thanks Jorden! :D
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
User avatar
Ben Varsek
Member
Posts: 2446
Joined: Mon 4. Apr 2016, 16:26

 

Post by Ben Varsek »

I realy like the ringwork pattern on the handle of this whip and the changing colors of the overlay - well done Brandon !!!

I remeber that there has been a tutorial by Lauren Wickline in this forum in which she explains her method of how to change from one color to another in the overlay. If I remeber it right she transitioned from herringbone to ringwork on both - the overlay and the belly beneath the overlay - before weaving those two layers into each other (and thereby creating the change of the colors in the overlay).
I'm not sure if this tutorial still exists but to find your own way of doing things (just like you did on this whip build) is always better than "just following" a certain tutorial in my opinion !!!

All the best
Ben
User avatar
Brandon "Sparky" Lam
Member
Posts: 1314
Joined: Thu 20. Oct 2016, 21:59
Location: Melbourne, Australia

 

Post by Brandon "Sparky" Lam »

Thank you Ben! It was such a surprise when the handle came out as it did :P

I don't believe I know of this explanation, but thank you for the information! That's definitely an interesting method...might experiment a bit more. Next time I'll try the splicing method, since I do it so much with the english eye :D
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
Johnny Pell

 

Post by Johnny Pell »

Brandon that looks killer. It's cool that your thinking outside of the box and it's even cooler that you are sharing. Thanks and keep up the good work.
User avatar
Brandon "Sparky" Lam
Member
Posts: 1314
Joined: Thu 20. Oct 2016, 21:59
Location: Melbourne, Australia

 

Post by Brandon "Sparky" Lam »

Thank you Johnny! :D I definitely hope to perfect this technique~
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
Bobbi Holyoak

 

Post by Bobbi Holyoak »

I love this! The colors look great. My vote is to keep it in your bag of tricks.
Post Reply

Return to “Whips (+++ public thread +++)”